Dimensions |
Lenght: |
490mm |
Chassis lenght: |
400mm |
Wheelbase: |
319~330mm |
Width: |
308mm |
Weight: |
1810g |
Approximate running weight: |
3409g |
Chassis |
Chassis: |
CNC-machined Swiss 7075 T6 hardcoated aluminum |
Radio tray: |
CNC-machined 2.5mm graphite |
Front upper deck: |
CNC-machined 2.5mm graphite |
Central diff upper deck: |
CNC-machined 2.5mm graphite |
Braces: |
Composite braces (front / rear) |
Suspension |
Suspension: |
Adjustable suspension with preset geometry |
Rear suspension: |
Lower H-arm with adjustable upper camber link |
Front suspension: |
Zero Kingpin suspension |
Rear upright: |
Composite with 3 roll center positions |
Shocks: |
15.3mm big-bore machined aluminum threaded shock bodies hard coated with protective rubber folding shock boots, oil-filled coil-over with 3.5mm shafts |
Shock towers: |
Front 4.0mm graphite, rear 3.5mm graphite |
Drivetrain |
Type: |
Full-time shaft-drive 4WD w/ center differential |
Primary: |
Steel spur gear / clutchbell |
Drive shafts: |
HUDY Spring Steel™ CVD drive shafts |
Central shafts: |
HUDY Spring Steel™ Direct Connection Shafts™ |
Differentials: |
Sealed, 6 gear, silicone-filled |
Bearings: |
Rubber-sealed |
Gearing |
Pinion: |
10T front / rear |
Crown gear: |
43T front / rear |
Ponion gear: |
17T |
Spur gear: |
42T |
Primary ratio: |
4.3:1 |
Final gear ratio: |
10.62 (range of 10.37-14.22) |
Body,Tires, Wheels & Misc |
Body: |
XRAY XB808E ultra-low profile body |
Tires: |
Not included |
Wheels: |
Not included, standard 17mm hub |
Adjustment possibilities |
Standard adjustment: |
Camber, front toe-in, wheelbase, rear anti-squat, front and rear roll center, Ackermann |
Optionally adjustable: |
rear toe-in, front kick-up, rear anti-squat |
Items not included |
|
Motor, Electronics (Radio, Receiver, Steering Servo, Battery Pack, Speed Controller), Wheels, Tires, Tools, Wheel tool, Switch,Paint, Charger, Universal tool for all nuts and turnbuckles |